The most popular model of the most powerful foam cutting technology
Fixed Table
The cutting frame moves along a fixed table, which is built in a range of sizes. Compact sizes are ideal for small spaces, while broader sizes can increase productivity by cutting two or more blocks at a time.
Dust Extractor Kits
Dust extractors are large vacuums that remove the dust during the cutting process, minimising the clean-up after jobs. It also helps keep a safer factory for its workers by lowering the amount of airborne dust.
Compatible with a Selection of Abrasive Wires
Three types of abrasive wires have been tested for compatibility and performance with this model. A description and purpose of each wire type can be found on our extras page.
OPTIONAL CONFIGURATIONS
A set of sensors that allow the cutting frame to automatically position itself to the front edge of the block. This saves the operator from manually positioning the machine at the start of each cutting job. This feature is standard with this model.
This attachment is ideal for a company cutting mainly EPS foam but have occasional quantities of rigid foams to cut. Combining cutting technologies is a unique Wintech offering. Read more about combo cutters.
This combination is ideal for a company cutting mainly rigid foam but have occasional quantities of EPS foam to cut. Combining cutting technologies is a unique Wintech offering. Read more about combo cutters.
A powered turntable is a rotating platform that is built into the table top. It can automatically rotate the block of foam in between cuts. This allows more complex 3D shapes to be cut, easily emulating convoluted contours.
The machine can be supported on a skid to allow the machine to be used on rough floor or to be moved regularly from site to site without the need to dismantle. This option is often selected for project sites that are remote or away from an industrial factory.
The existing nesting function in Wintech’s Profiler software allows efficient nesting of a single shape. The AutoNEST software option can be used in conjunction with the Profiler software for more efficient nesting where variable quantities of different shapes are required in a single cutting job.
The digitiser tablet can be used for tracing around existing shape templates or actual shapes, creating drawings to be used in the Wintech Profiler software. The drawings can then be conveniently stored on the computer, ready for regular production jobs. This option is ideal for first-time CNC companies, who is looking to automate their manual production flow.
Popular Uses
Custom Contours
Cut custom shapes with computer-controlled accuracy, to ensure quick and quality results every time.
Sheeting
The wire cuts on both passes, allowing a block of foam to be quickly sliced into sheets of equal or varying thickness. The software also compensates for the thickness of the wire, so all cuts are done with incredible accuracy.
Diverse Materials
This machine is a great choice for companies who work with a wide variety of foam types. It can cut through any type of foam that a project requires, from flexible, rigid, semi-rigid to heavy syntactic foams.
Pipe and Tank Insulation Industry
The horizontal model is most commonly used to cut tank and pipe insulation for process plants. Many of the well-known international insulation companies own multiple Wintech machines and move them from project to project.
Tech Specs
Horizontal Fastwire CNC Cutter
We build machines to fit any block size and layout to increase your productivity. Contact us for information on a custom size.
2 Block Cutting Capacity
3 Block Cutting Capacity
4 Block Cutting Capacity
| Dimensions | |
|---|---|
| Machine (W × L × H) | 2220 × 4600 × 3300 mm 87.4 × 181.1 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 1300 × 3000 × 1250 mm 51.2 × 118.1 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
2 Block Cutting Capacity
| Dimensions | |
|---|---|
| Machine (W × L × H) | 2220 × 6600 × 3300 mm 87.4 × 259.8 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 1300 × 5000 × 1250 mm 51.2 × 196.9 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3120 × 4600 × 3300 mm 122.8 × 181.1 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 2200 × 3000 × 1250 mm 86.6 × 118.1 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
3 Block Cutting Capacity
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3120 × 6600 × 3300 mm 122.8 × 259.8 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 2200 × 5000 × 1250 mm 86.6 × 196.9 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3420 × 4600 × 3300 mm 134.6 × 181.1 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 2500 × 3000 × 1250 mm 98.4 × 118.1 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
4 Block Cutting Capacity
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3420 × 6600 × 3300 mm 134.6 × 259.8 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 2500 × 5000 × 1250 mm 98.4 × 196.9 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3620 × 4600 × 3300 mm 142.5 × 181.1 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 2700 × 3000 × 1250 mm 106.3 × 118.1 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3620 × 6600 × 3300 mm 142.5 × 259.8 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 2700 × 5000 × 1250 mm 106.3 × 196.9 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3920 × 4600 × 3300 mm 154.3 × 181.1 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 3000 × 3000 × 1250 mm 118.1 × 118.1 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
| Dimensions | |
|---|---|
| Machine (W × L × H) | 3920 × 6600 × 3300 mm 154.3 × 259.8 × 129.9 in |
| Control Cabinet (W × L × H) | 1600 × 450 × 1150 mm 63 × 17.7 × 45.3 in |
| Factory footprint | |
| Floor Plan | Recommended 2000 mm clearance area for service and loading/unloading. |
| Safety Barriers | Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains. We encourage customers to investigate the safety regulations established by their country, district or workplace. |
| Capacity | |
| Foam Type(s) | Ideal for rigid and semi-rigid foam Able to cut flexible foam and EPS |
| Cutting Volume (W × L × H) | 3000 × 5000 × 1250 mm 118.1 × 196.9 × 49.2 in |
| Specifications | |
| Voltage | 3 phase and earth |
| AC Power | Standard builds are 380–420v +/- 10% Customer specified on order |
| Frequency | 50 or 60 HZ +/- 1% |
| Configurations | |
| Optional | Hotwire Attachment Powered Turntable Block Detection |
| Operating conditions | |
| Temperature | 0–35˚ Celsius 32–90˚ Fahrenheit |
| Humidity | Maximum of 80% non-condensing |
| Accessories | |
| Included | Control Cabinet Profiler Software Remote Operator Handset |
| Optional | Air Freight Kit AutoNEST Software Chain Table Digitiser Dust Extractor Kit Fence Barriers Light Curtains Skid |
FAQs
Small machines can simply be wheeled into a shipping container and secured. Larger machines must be dismantled to fit into a container. On arrival at the factory a Wintech technician will come to assemble and commission the machine, and train the operator.
Wintech provides a 12 month / 2000 hours warranty on all machines.
Wintech has authorised agents around the world who have their own service technicians.
Wintech manufactures and supplies a range of blades suitable for a variety of applications.
The machines themselves can operate in a wide range of temperatures. In extremely hot, cold or dusty factories we recommend placing the control cabinet in a separate temperature controlled operator booth. Wintech Fastwire machines are rugged and able to operate on remote sites in temporary buildings. The control cabinet housing the computer and electronics is air-conditioned and pressurised to provide dust isolation.
Contact us
Choose your model
Horizontal
Fastwire
Twin
Fastwire
Dual-Axis
Fastwire
Vertical
Fastwire
Low-Profile Vertical
Fastwire